We use Git to manage our source code. Our Stash installation is the front end we use to manage our different Git repositories.
This page will help you get started with Git and getting the KIELER sources. For more detailed information, see Git's official documentation. The SVN Crash Course is probably a good place to start. For more in-depth information, see the Git Community Book or the Pro Git book. Furthermore, each office has a copy of another excellent book about Git, so you might as well go ahead and read it. This will help ease you in to some of the more advanced concepts of Git, which are a little hard to understand at first. If everything else fails, Miro and Tim will be more than happy to help you with Git and rant about how excellent of a system it is. For more information on Git Eclipse integration, see the EGit User's Guide.
You shouldn't need to check out anything manually if you have installed Eclipse using our Oomph setup.
KIELER is essentially a large heap of Eclipse plug-ins that aren't easy to find your way through as a new developer. The Overview page has a nice overview of our sub-projects and what plug-ins belong where. This section will tell you how to get the KIELER sources. As for what plug-ins you will actually need to checkout, ask your advisor.
Repository access via SSH runs on port 7999. For accessing the repositories in read-only mode, HTTP transfer is also possible, but not recommended.
Checkout of the Git repository is possible either using the SSH or the HTTP protocol. We strongly recommend using SSH; if you still want to use HTTP, omit the SSH key creation and upload in the instructions below.
ssh-keygenon the command line. Simply type
ssh-keygen, confirm the default destination file ~/.ssh/id_rsa, and choose whether to give a passphrase. If you have a passphrase, you need to enter it whenever you use your SSH key for the first time in a session. You can omit the passphrase, but that makes the key less secure. As result, the tool generates a private key ~/.ssh/id_rsa, which has to be kept secret, and a public key ~/.ssh/id_rsa.pub.
semantics(if in doubt, ask your adviser which of these you need). If you for whatever reason insist on using the less efficient HTTP protocol, use the following URI:
Checking out on the command line is done with the command
git clone <URI> <local path>. Instead of the URI you can also use a path to a local repository, which then creates a clone of that repository.
If you have already cloned the KIELER repository and are only looking for a way to import it into EGit, follow these steps:
In the Git Repository View, perform Right-click > Import Projects... on the Working directory or Plugins folder. Hit Next. In the following dialog you can Deselect all and afterwards select the plugins that you need for your developing task.
For example, if you want to start KIELER with SCCharts you need to import
all core plugins (core.*) from the semantics and pragmatics repositories
As a result you will have the following plugin projects in your workspace:
If there are errors in your workspace, they are most likely the result of missing plugins. To solve this, check if the MANIFEST.MF file of the project has error markers. Import missing plugin dependencies if required.
After all dependencies are solved and there are still errors, you should clean your workspace via Project > Clean > All projects.
If there are errors in an xtend-gen folder you can delete this folder so that the contents are re-compiled. (It sometimes happens that this folder is not deleted as part of the clean.)
There should not be any errors after all required plugins are imported and compiled correctly.
Your working copy must be clean before you can merge any updates into it. Therefore, always commit your changes locally before you pull. If you don't want to commit them into the master branch, commit them into a new branch. Note that pulling is the same as fetching remote changes and merging them into your local branch. Since a normal merge operation is involved, this can lead to conflicts, which need to be resolved as described below. Note that pulling always merges the remote changes into your current branch. If that's not what you want, checkout the correct branch first or just do a fetch.
Do one of the following three things:
git pullon the command line and refresh your workspace.
Whenever branches are merged or rebased, conflicts can occur. They can be resolved by adjusting the state of your working copy, marking it as clean, and committing the changes. Conflicted files are modified so they contain both your version and the remote version. Edit them until all conflict areas are clean. In Eclipse this can be done by right-clicking the conflicted files - Team - Merge Tool.
If you try to pull from a remote repository or merge branches although you have local uncommitted changes, and the merge would affect the same files, Git leaves those files as they are, thus discarding the changes that would be made by the pull or merge operation. As a consequence, committing such a conflicted state would ignore the changes of the merged branch even if the commit graph looks like a regular merge has happened. Therefore keep in mind never to pull or merge with uncommitted changes.
Taking your version of conflicted files:
git checkout --ours <path>
Taking the remote version of conflicted files:
git checkout --theirs <path>
Git manages changes in two separate steps:
The first step can be done offline, which is very useful in situations where you don't have an internet connection, but would like to save intermediate development snapshots in the history. You can push multiple commits to the remote repository, which for example means that if you are performing changes that would create broken intermediate states, you can commit any number of snapshots locally and only push the whole bundle of commits after you have reached a state that works again.
If another developer has pushed changes since the last time you have pulled from the server, your attempt to push your commits online may fail. In this case you need to pull the remote changes before you can push. Never use force pushing! (
git push -f)
Make sure you have set up your name and email address properly, as described on the Configuring Eclipse page.
To commit changes with EGit, do one of the following and select the files you would like to commit:
To commit your changes on the command line, do the following:
git addto select (stage) the files you would like to commit (new files as well as modified files).
git committo create a commit from the staged files.
To push your commits to a remote repository with EGit, do one of the following:
To push your commits on the command line, enter
If you want to revert all your local changes and get back to the previous repository state, use
git reset --hard or the Reset item in the EGit context menu. If you only want to revert some specific files, do one of the following:
git checkout <path>on the command line.
By giving a branch, tag, or commit number in
git checkout <commit> <path>, you can get to any existing version of the files. If no path is given,
git checkout <commit> switches your whole working copy and index to the specified branch, tag, or commit number. If
git reset is given a commit number, the current branch is modified to point at the given commit.
This is a brute force modification, and you probably won't be able to push the new branch
In case the working directory is messed up with unstaged files, which are not affected by
git reset --hard, a clean up is achieved by means of
git clean -f. The additional switch
-d applies this to directories, respectively. Hence,
git reset followed by
git clean act like
git clean -X removes only the files that are ignored by Git, that is mainly the .class files generated by the Java compiler. A full rebuild is required afterwards.
Branches are used to structure your development and are an essential tool for effective work in the KIELER team. Read the Source Code Management page if you haven't yet understood what branches are good for.
Do one of the following:
git branch <name>. In this case, the new branch is not active; if you want to activate the new branch while creating it, enter
git checkout -b <name>.
In either case the new branch starts at the current position of your working copy, i.e. it branches from the current branch you are on. In order to branch from a different position, either check out that other branch first or select it as source ref in the EGit wizard (on the command line simply type git branch <name> <start_point>).
Do one of the following:
git checkout <name>.
Note that your local uncommitted changes are transferred when switching the current branch.
You always merge another branch into the current branch. Therefore you first have to checkout the target branch prior to merging. Then, do one of the following:
git merge <source_name>.
This creates a new merge commit, i.e. a commit with two source commits, and the target branch (the one you're currently on) contains all changes that have been done in the source branch (the one selected for merge). The source branch is not modified. A merge is done implicitly when pulling: assuming you're on branch master, the command git pull origin master is the same as git fetch origin followed by git merge origin/master, where origin/master is the remote tracking branch for master.
Stash allows the creation of personal server-side clones of the KIELER repository, which is highly encouraged as described on the Source Code Management page. When working with such clones, it is often necessary to synchronize the different server-side repositories with the local one. Git supports this by allowing to configure multiple remotes in the local repository. On the command line this is done simply by entering git remote add <name> <url>, where <name> is an arbitrary local identifier for the remote repository. For example, a remote named origin is automatically created when a local repository clone is created through git clone <url>.
When you push or pull branches, simply select the remote you wish to interfere with. Pulling is done by
git pull <remote> <branch>, and pushing is done by
git push <remote> <branch>.